Shock Absorber Dust Cover Kit 33526776132 For BMW E70 E71

1. Use the opening to separate the bottom of the gear ball head from the dust. The lower part of the ball head is surrounded by a dustproof sleeve, and the bottom of the ball head is supported by an opening to separate the dustproof sleeve from the ball head;

2. Use a screwdriver to slowly pry up the layering from the edge of the dust cover, and pry up all around the dust cover, so that the dust cover can't be removed because the disassembly is not in place;

3. When installing, install the dust cover in the panel, then aim the clip on the panel at the notch of the tea table board and press it. Install the gear ball head and it will be assembled.