Lift the body of the installation part with a jack (or lift the whole vehicle on the upper frame), and the spring is stretched to facilitate installation. You can fully see the shock absorber spring, and there is no need to rise too high;
Spray soapy water to clean the spring (mainly to remove sand stains on the surface of the spring), and spray some soapy water to lubricate the buffer glue (enough lubrication will make it more convenient for the spring to be seated and aligned). After installation, thoroughly clean the soapy water to prevent the automobile safety part-damping spring from rusting and breaking, causing man-made injuries;
Install the cushion rubber in the middle of the spring (please refer to the installation skills introduced later), ..., put down the car body after each wheel is installed, and make sure that the spring enters the upper and lower slots of the cushion rubber.
