Rubber Spring Pad 31336787114 For BMW F35

When the spring pad is damaged and fails, the following are some professional inspection and replacement steps:

1. Check the appearance: First, check the appearance of the spring pad for obvious damage, crack or deformation. These problems may cause the spring pad to lose its normal cushioning and shock absorption effect.

2. Check the elasticity: use appropriate tools, such as compressor or manual pressure testing device, to test the compression of the spring pad. Check whether the spring pad can be restored to its original shape without obvious deformation or softening. If the spring pad fails to recover normally or becomes too soft, it may need to be replaced.

3. Check the damping effect: observe and feel the damping effect of the spring pad by testing driving on the vehicle. If the vehicle bumps and vibrates obviously when passing through the uneven road surface, or the ride comfort decreases obviously, it may be that the spring pad has lost its normal shock absorption function.

4. Replace the spring pad: If the spring pad is confirmed to be damaged or faulty, it should be replaced in time. First, lift the vehicle to an appropriate height to replace the spring pad. Then, use an appropriate tool, such as a wrench or pneumatic tool, to disassemble and remove the original spring pad. When installing a new spring pad, make sure that it is properly installed and closely attached to the spring and other hanging parts.

5. Test and adjustment: After replacing the spring pad, conduct test driving to observe and feel the damping effect of the new spring pad. If necessary, it can be adjusted according to the actual situation to ensure the normal operation and ride comfort of the suspension system.

In short, when the spring pad is damaged and fails, it should be carefully checked and replaced in time. This can ensure the normal operation of the suspension system, improve the ride comfort and protect other suspension components from further damage. If you are not sure how to check and replace, it is recommended to consult a professional auto repair technician or go to a professional auto repair shop for repair and replacement.