| Quantity: | |
|---|---|
Product Description
1. Check lubricating oil leakage: First, check whether there is any sign of lubricating oil leakage at the bottom of the wave box. If leakage of lubricating oil is found, it may be caused by poor sealing of gearbox rubber. You can clean the bottom of the gearbox and observe it for a period of time to confirm whether there is any new lubricating oil leakage.
2. Check noise and vibration: When the vehicle is driving, pay attention to whether there is abnormal noise or vibration. Pay special attention to whether there is obvious noise or vibration when shifting or accelerating. If there is, it may be that the parts are loose or the friction is increased due to the damage of the gearbox glue.
3. Check the shift difficulty: test whether the shift operation becomes difficult or unsmooth. Pay attention to whether there are problems such as shifting jitter, inaccurate gears or inability to shift gears. If these problems occur, it may be that the gear shifting mechanism is abnormal due to the damage of gearbox rubber.
4. Check the steering flexibility: test whether the steering operation of the vehicle becomes inflexible. Pay attention to whether steering is difficult or unpredictable. If these problems occur, it may be that the transmission shaft is unstable or the friction increases due to the damage of the gearbox rubber.
1. Lifting the vehicle: use a suitable jack to lift the vehicle to a safe height and ensure the stability of the vehicle.
2. Cleaning the working area: clean the working area around the wave box to ensure that there are no sundries and dirt.
3. Dismantle the old glue: according to the specific model of the vehicle and the structure of the gearbox, disassemble the old gearbox glue. It may be necessary to remove some accessories or parts for better access to the gearbox glue.
4. Install new glue: Use appropriate tools and techniques to install new wave box glue. Ensure that the glue is located accurately and installed according to the manufacturer's instructions.
5. Inspection and testing: After installation, check and test the wave box. Ensure that the gearbox rubber is well sealed, the gear shifting operation is normal, and there is no lubricating oil leakage and abnormal noise.
If you don't have the relevant technology and experience, it is recommended to seek the help of professional car maintenance personnel. They can inspect, replace and test according to the specific situation, and ensure the correct installation and function of the wave box adhesive.
