After removing the shock absorber, remove the dust cover of the fixed nut on the shock absorber; Fix the white bar with an open-ended wrench, and remove the fixing nut with an open-ended wrench or a ring wrench or a small adjustable wrench; Remove the damaged buffer rubber block with a straight knife; Install the buffer rubber block and assemble the shock absorber.
Raise and fix the vehicle to ensure safety. Remove the original rear shock absorber. Place the new rear shock absorber dust boot on the shock absorber, and pay attention to the direction and position. Use special tools to fix the dust cover on the shock absorber to ensure sealing and tightness.
The application of equipment to lift the car does not need to be too high, so that the wheels can be at a distance from the road, which is convenient for practical operation. Completely remove the nuts of the wheel in the order of top angle with the specifications of the sleeve, and then remove the wheel.
First, the vehicle needs to be lifted and fixed on the bracket for better installation. Then, it is necessary to remove the front tire and accessories on the shock absorber, such as nuts and bolts on the shock absorber. When removing the shock absorber, pay attention to the position of the shock absorber to make it easier to install the dust cover.
