The automobile headlight regulator is connected with the regulating screw through the micromotor drive drive device, so as to adjust the irradiation direction of the headlight. The micromotor is connected with the adjusting screw through the transmission device (including the micromotor, plastic gear, output worm), which converts the rotating motion into the adjustment of the illumination direction of the headlamp. This design allows the light to return from the deviated direction to the standard direction, thereby improving the lighting effect of the headlamp
The material of the adjusting rod of the automobile headlight mainly includes plastic materials, such as steel, nylon, wave fiber and so on . The selection of these materials is mainly to adapt to the heat and noise generated by the friction of the gear group during the operation of the regulator, to ensure the normal operation of the gear box and its good noise reduction effect
Avoid collision: Avoid external impact on the thermostat water pipe to avoid rupture and damage.
