Engine Mount 22116786836 For BMW E70 E71

When the engine support fails, the following are some professional inspection and maintenance steps:

1. Check whether the support is damaged or broken: First, check whether the engine support is obviously damaged or broken. The support usually consists of rubber pads, metal brackets and bolts. If the support is found to be damaged or broken, it is necessary to replace the support in time to ensure the stable support of the engine.

2. Check the looseness of the support: check whether the bolt of the support is loose. If looseness is found, tools such as wrench or wrench socket can be used to tighten the bolt to ensure the tight connection between the support and the engine and body.

3. Check the wear or aging of the rubber pad: Check whether the rubber pad in the support has obvious wear or aging. If wear or aging is found, rubber pads need to be replaced to ensure that the engine can get good shock absorption and vibration isolation effects.

4. Check the position and installation of the support: Check whether the support is correctly installed between the engine and the body, and the position is correct. If it is found that the position is incorrect or the installation is not firm, it is necessary to reinstall the support to ensure the stable support of the engine.

When inspecting and repairing the engine support, it is recommended to follow the following precautions:

-Use appropriate tools and equipment to ensure the safety and accuracy of operation.

-Pay attention to personal safety and avoid inspection and maintenance when the engine is not cooled or running.

-Operate according to the instruction manual of the automobile manufacturer or the advice of professional technicians to ensure the correct inspection and maintenance procedures.

-If you are not familiar with the inspection and maintenance of engine support, it is recommended to seek the help of professional technicians to ensure the correctness and safety of operation.

To sum up, when the engine support fails, it should be repaired and replaced by checking the damage, fracture and looseness of the support, the wear or aging of the rubber pad and the position and installation of the support. Ensure that the engine can be stably supported, and ensure the driving safety of the vehicle and the normal operation of the engine.