| Quantity: | |
|---|---|
Product Description
1. Abnormal noise: Improper installation or damaged parts may cause abnormal noise, such as clicking, rattling or abnormal noise, etc. on the axle shaft during driving. These noises may be caused by improper tightening of bolts at the joint of half shafts, bearing damage or insufficient lubrication.
2. Oil leakage: If the seal is not properly installed or damaged during installation, it may lead to the leakage of axle shaft lubricating oil. Oil leakage will lead to insufficient lubrication inside the axle shaft, increase wear and affect the normal work of the transmission system.
3. Vibration: The unbalanced installation of the half axle or the weak joint may cause the vehicle to vibrate during driving. Vibration will affect the handling and comfort of the vehicle, and even damage other transmission parts in severe cases.
4. Uneven tire wear: If the axle shaft is improperly installed or adjusted, it may lead to uneven contact between the wheel and the ground, resulting in uneven tire wear. This will reduce the driving stability and handling performance of the vehicle, while increasing the frequency and cost of tire replacement.
5. Ineffective steering: Incorrect installation or damage of the half axle may affect the steering performance of the vehicle, making the steering inflexible or inaccurate. This will affect the driver's control feeling and increase the driving risk.
To sum up, abnormal noise, oil leakage, vibration, uneven tire wear and inflexible steering may occur after the automobile axle is installed. In order to ensure the normal operation of the semi-axle and the safety performance of the vehicle, the installation should be carried out in strict accordance with the manufacturer's requirements to ensure that each step is correct. If the above problems are found, they should be repaired and adjusted in time to avoid further damage and potential safety hazards.
